Fast, accurate punching of 'any-shape' of hole in 'any-shape' of tube 

The standard Kingsland Tubemaster comprises of: 

• 60P Hydraulic Punching machine with 625 mm deep throat
• See-through work area guard
• Automatic HK-A1-001 CNC control (see CNC control description page on website)
• Mandrel (tube die) with 3.6 m tube and adjustable holders
• 2 x 4.0 M conveyor systems giving an operating distance of 3.6 M, with 225 mm wide built-in steel rollers, and vertical positioning guides.

The standard unit will punch tube from 25 mm to a maximum 150 mm outside dimension, up to 3.6 M long, and can be extended in 1.0 m lengths up to 7.6 m. Tubes up to a maximum of 80 mm outside dimension can be punched right through (top and bottom) in 1 hit.

Each different size of tube will require a new mandrel and may require a new bottom die block and stripper.

Each different size and shape of hole may require a new punch, mandrel, stripper and bottom die block.

The standard Tubemaster range:

• Part No. 1104    KINGSLAND TubeMaster - 3.6 M working length................................. standard
• Part No. 1105    KINGSLAND TubeMaster - 4.6 M working length................................. Optional
• Part No. 1106    KINGSLAND TubeMaster - 5.6 M working length................................. Optional
• Part No. 1107    KINGSLAND TubeMaster - 6.6 M working length................................. Optional
• Part No. 1108    KINGSLAND TubeMaster - 7.6 M working length................................. Optional

* Including rigid, non-seaworthy packing of the in and out feed.

Additonal Equipment available for use with TubeMaster:

• Automatic tool lubrication system, 2 flexible nozzles on magnetic................................ Optional
• Mounts and a 3.0 litre reservoir (requires own air supply).............................................. Optional
• Automatic clamping of the feeder gripper........................................................................... Optional
• Magnetic moveable 12v halogen lamp............................................................................... Optional
• Punches, dies and mandrels are priced individually,
• based on the customer’s dimensioned drawing(s):......................................................... T. B. A.

When ordering, please specify:

• The tube shape and size – including wall thickness.
• Material to be punched (with tensile strength if known)
• The maximum tube length
• The shape and size of the hole(s) to be punched
• The distance between each hole, how many holes and where they are located in the tube.

 Please supply at least 5 sample lengths of tube to enable us to test and prove-out the tooling.

 Due to continuous development, Kingsland reserve the right to change the specification without prior notice.